From 24 March 2027 (subject to confirmation), replacement windows and doors in England must meet updated Part L requirements, with a second operative date of 24 September 2027 (subject to confirmation) covering further provisions. The rules no longer assess thermal performance through U-value alone. Windows and doors must now be considered alongside Part O (overheating) and Part F (ventilation) as a combined package.

If you are planning to replace timber windows or doors in the next year or two, understanding these changes now will save you time and avoid having to revisit specification decisions once the rules come into force.


What is Part L and why does it matter for windows and doors?

Part L of the Building Regulations covers the conservation of fuel and power in buildings. For homeowners, it sets the thermal performance standards that replacement windows and doors must meet. Any competent installer must demonstrate compliance, and building control can ask for evidence.

The 2026 revision, set out in the updated Approved Document L, represents a substantial revision to how thermal performance is assessed. The headline shift is that thermal performance can no longer be looked at in isolation.


How does the new approach differ from the old U-value-only rule?

Under previous guidance, a replacement window or door broadly needed to meet a maximum U-value, and hitting that number was considered sufficient for compliance. The 2026 framework asks assessors and specifiers to consider three documents together, and a window that performs well thermally could still require design adjustments if it creates an overheating risk or reduces background ventilation below acceptable levels:

  • Part L (energy efficiency and thermal performance)
  • Part O (overheating risk, particularly relevant for south- and west-facing glazing)
  • Part F (ventilation, including the role opening windows play in air quality)

For homeowners replacing like-for-like, this will usually be straightforward. For those changing window type, size, or orientation significantly, it is worth discussing compliance at the specification stage.


What does this mean in practice for a homeowner replacing timber windows?

For most straightforward replacements, the changes will not require dramatic action. A well-specified timber window made to the correct dimensions and glazing specification will meet Part L requirements, provided the installer documents compliance correctly.

Where it gets more involved:

  • Larger openings or more glazing than before. Adding glazing area, particularly on south-facing elevations, may trigger a Part O assessment.
  • Rooms that already run warm. If a room suffers in hot weather, the specification of new windows needs to account for solar gain.
  • Ventilation provision. Timber windows can incorporate trickle vents, which help satisfy Part F requirements. If your current windows have trickle vents and replacements do not, that needs justifying.
  • Conservation areas and listed buildings. These properties carry separate consent requirements, and the regulations do make provision for situations where meeting full current standards would harm the character of a building. Your local authority and building control will guide this.

When do the new rules come into force?

There are two key dates (based on current draft regulations, subject to confirmation):

Date What changes
24 March 2027 First operative date for updated Part L requirements in England
24 September 2027 Further provisions come into effect; confirm scope with building control

Work carried out before 24 March 2027 under a valid building notice or full plans application may be able to proceed under the previous rules in some circumstances. Confirm this with your building control body before proceeding.


Do the rules apply to listed buildings and conservation areas?

There is specific provision within the regulations for buildings where strict compliance would alter their character. Listed buildings and those in conservation areas have long been handled differently, because achieving a modern centre-pane U-value in a single-glazed Georgian sash, for example, is often physically impossible without destroying the original fabric.

The approach in practice is to demonstrate that you have gone as far as reasonably practical. Secondary glazing, slim double-glazed units that some period joinery can accommodate, and draught-sealing can all contribute. You can find out more on our wooden sliding sash windows page.


Do timber windows struggle to meet modern thermal standards?

Timber windows, specified properly, perform well against Part L requirements. The material itself has lower thermal conductivity than aluminium, and modern glazing units, combined with quality seals and ironmongery, bring the overall window U-value to a competitive level.

Timber also allows for thicker sightlines where needed to accommodate better-performing units without looking out of proportion, which matters particularly in period properties.

The frame material is one part of the picture. The glazed unit, the installation quality, the draught sealing and the ventilation provision all contribute to whether a window meets the regulations as a system, not as individual components.


Should you act before the 24 March 2027 deadline?

There are reasonable arguments for proceeding with a replacement project before the first operative date if your windows genuinely need replacing. Conversely, if you are planning a project for later in 2027, it is worth engaging with a manufacturer who understands what the new framework requires and can specify accordingly from the start.

The worst outcome is commissioning work that does not comply, then having to revisit specification or installation before sign-off. Getting advice early, at the point of enquiry rather than at the point of fitting, avoids that.

You can find out more about our window and door services or get in touch to talk through your project with the team at our West Yorkshire factory.


FAQ

Do I need building regulations approval to replace windows and doors?

Your installer should be able to tell you which route applies and provide a certificate once the work is complete.

Will I need a Part O assessment for my replacement windows?

For standard like-for-like replacements on typical elevations, a detailed Part O calculation is unlikely to be required. If you are significantly increasing glazing area, particularly on a south or west-facing wall, it is worth discussing this with your installer or architect before specifying.

Can timber windows comply with Part L 2026?

Yes. Timber windows can achieve the required thermal performance when specified with the appropriate glazing unit, seals and hardware. The frame material alone does not determine compliance: the whole window, including installation quality and ventilation provision, is what the regulations assess.

What happens if my property is in a conservation area or is listed?

The regulations include provision for cases where strict compliance would unacceptably alter a building’s character. In practice this means demonstrating you have improved performance as far as reasonably practical. Your local planning authority and building control body will advise on what is expected.

What is the difference between the 24 March 2027 and 24 September 2027 dates?

See the table above. If you are unsure which applies to your project, building control can confirm.

Planning a project?

Send photographs, drawings or an outline of your requirements and the Farrar team can advise on the most useful next step.

Get my free quote